Recessed Lighting

Over the years, recessed lighting systems have gained rapid popularity in many modern residential structures since it basically offered a sleek and streamlined look that can easily blend in any existing interior décor. Installing recessed lights is a popular trick often used by decorators to create an illusion of more space in smaller areas of the room and draw attention to a certain objects such as a painting or plant. It works best with dim lights for a better overall effect and are can be a great supplemental light in any room in the house.

As the word suggests, recessed lighting are expertly ensconced on ceilings and walls to create more drama. Most of the available recessed lights today have a retrofit application, which basically means you can easily slip it into a space on the ceiling with a specifically designed hole to efficiently accommodate the electrical wirings.

It is generally a bad idea to place recessed lighting too close to each other in rows since your room may look like an airport runway. The rule of the thumb here is to match the size of the lighting fixtures to the distance of its installations or how closely they are installed. To give you a more specific idea, you can simply floor the popular rule: a 4-inch fixture should at least be placed 4 feet apart. You can place the recessed lighting at approximately 12-18 from the front of the object that you want to light. However, if you want to use recessed light fixtures for illuminate specific tasks such as reading, it should be carefully placed overhead rather than in walls, as shoulders or head have the tendency to block the light or create shadows. It you are attempting to use recessed lighting effects to light up 3 dimensional objects, it is generally a good idea to used at least three lights in varying angles. You can direct it the lights to neighboring walls to push out the walls and create a seemingly bigger space or focus it towards the highlighted object to attract more attention.

Whether you choose different bulbs for your recessed lights such as halogen, fluorescent, or other standard lines, the usual sizes available are 4,5 and 6 inches in diameter. More often than not, a 6-inch fixture are used on entryways or hallways and the 4-inch size have been known to be more appropriate in small spaces since they provide a more contemporary. However, if your walls have fine moldings and intricate plasterwork, it is actually not a good idea of installing recessed lighting; chandeliers and wall sconces make a far more suitable choice.

You may be wondering as to the degree of difficulty on how to install recessed lighting systems. The great news is it is actually easier that you would initially anticipate, especially if you access ceiling such as attics that can work to your advantage. Most manufacturers today offer the cut-in can types that have been known to provide safer contact since it is insulated and can actually be installed from below. The major consideration here in the installation is the proximity to a power source. If you already have a ceiling box where you plan to install your light, you simply disconnect the wirings from the box and attached it to the cut-in cans. You can start cutting a circular hole on the ceiling and concentrate on attaching the wires to the junction box before sliding the light fixture up until its mounting clip catches. Since you already have the power source from the ceiling and the switch on the wall, you are ready to test your own handiwork.